MODEL
DJZ
ISO 05 - X&Y: Flow into workports A and B or out of A and B
CAVITY: T-16A
Check, A and B, Free Flow Into Valve, High Capacity
Check, A and B, Free Flow Out of Valve, High
Capacity
Flow Control, Meter-In A and B, High Capacity
Flow Control, Meter-Out A and B, High Capacity
TECHNICAL DATA
Body Type Sandwich
Interface ISO 05 - X&Y
Body Features Flow into workports A and B or out of A and B
Stack Height 76 mm
Open Cavities 2
Cavity T-16A
Model Weight 1.61 kg.
MODIFIER
6061-T651 Aluminum, Buna-N
/S 65-45-12 Ductile Iron, Buna-N, Blackened
snhy.com/
DJZ
MANIFOLD FACES
NOTES
Stack height value in technical data table includes seal retainer plate.
This installation requires a retainer and seal kit which are purchased separately. See "Related Accessories" section.
For check valve application, use only with CX*A check valves - free flow nose to side.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
Model Code Example: DJZ
CONFIGURATION OPTIONS